EPOCH 600

Compact and Rugged Flaw Detector

• Compact and Rugged

• Vivid VGA Display

• Intuitive Interface

• EN12668-1 Compliant

 

 

Key Features

• Designed to meet the requirements of EN12668-1

• PerfectSquare™ tunable square wave pulser

• Digital high dynamic range receiver

• Eight digital filters for enhanced signal-to-noise ratio

• 2 kHz PRF for rapid scanning

• Knob or navigation pad adjustment configurations

• Large, full VGA sunlight readable display

• Long battery life, supporting lithium-ion or alkaline batteries

• Standard dynamic DAC/TVG and onboard DGS/AVG

• 2 GB microSD memory card for data transfers and storage

• Optional Corrosion Module software

• USB On-The-Go (OTG) for PC communication

• Alarm and VGA outputs

• Optional analog output

 

 

General	Overall dimensions (W x H x D)	236 mm x 167 mm x 70 mm (9.3 in. x 6.57 in. x 2.76 in.)
	Weight	1.68 kg (3.72 lb), including lithium-ion battery
	Keypad	English, International, Japanese, Chinese
	Languages	English, Spanish, French, German, Japanese, Chinese, Portuguese
	Transducer connections	BNC or Number 1 LEMO
	Data storage	50,000 IDs onboard, removable 2 GB MicroSD card (standard)
	Battery type	Single lithium-ion rechargeable standard
	Battery life	12 h to 13 h (lithium-ion), 3 h (alkaline)
	Power requirements	AC Mains: 100 VAC to 120 VAC, 200 VAC to 240 VAC, 50 HZ to 60 Hz
	Display type	Full VGA (640 x 480 pixels) transflective color LCD, 60 Hz update rate
	Display dimensions (W x H, Diag.)	117 mm x 89 mm, 146 mm (4.62 in. x 3.49 in., 5.76 in.)
Pulser	Pulser	Tunable Square Wave
	PRF	10 Hz to 2000 Hz in 10 Hz increments
	Energy settings	100 V, 200 V, 300 V or 400 V
	Pulse width	Adjustable from 25 ns to 5,000 ns (0.1 MHz) with PerfectSquare™ technology
	Damping	50, 100, 200, 400 Ω
Receiver	Gain	0 to 110 dB
	Maximum input signal	20 V p-p
	Receiver input impedance	400 Ω ± 5%
	Receiver bandwidth	0.2 MHz to 26.5 MHz at -3 dB
	Digital filter settings	Eight digital filter sets standard (0.2-10 MHz, 2.0-21.5 MHz, 8.0-26.5 MHz, 0.5-4 MHz, 0.2-1.2 MHz, 1.5-8.5 MHz, 5-15 MHz, DC-10 MHz)
	Rectification	Full-wave, Positive Half-wave, Negative Half-wave, RF
	System linearity	Horizontal: ± 0.5% FSW
	Resolution	0.25% FSH, amplifier accuracy ± 1dB
	Reject	0 to 80% FSH with Visual Warning
	Amplitude measurement	0 to 110% full screen height with 0.25% resolution
	Measurement rate	Equivalent to PRF in all modes
Calibration	Automated calibration	Velocity, Zero Offset Straight Beam (First Backwall or Echo-to-Echo) Angle Beam (Soundpath or Depth)
	Test modes	Pulse Echo, Dual, or Through Transmission
	Units	Millimeters, inches, or microseconds
	Range	3.36 mm to 13,405 mm (0.132 in. to 527 in.) @ 5,900 m/s (0.2320 in./μ)
	Velocity	635 m/s to 15240 m/s (0.0250 in./µs to 0.6000 in./µs)
	Zero offset	0 µs to 750 µs
	Display delay	-59 mm to 13401 mm (-2.323 in. to 527.6 in.) @ longitudinal velocity in steel
	Refracted angle	0° to 85° in 0.1° increments
Gates	Measurement gates	2 fully independent gates for amplitude and TOF measurements
	Gate start	Variable over entire displayed range
	Gate width	Variable from Gate Start to end of displayed range
	Gate height	Variable from 2 to 95% full screen height
	Alarms	Positive and Negative Threshold, Minimum Depth (Gate 1 and Gate 2)
Measurements	Measurement display locations	5 locations available (manual or auto selection)
	Gate 1	Thickness, Soundpath, Projection, Depth, Amplitude, Time-Of-Flight, Min./Max. Depth, Min./Max. Amplitude
	Gate 2	Same as Gate 1
	Echo-to-Echo	Standard Gate 2-Gate 1, Optional IF Gate Tracking
	Other measurements	Overshoot (dB) value for DGS/AVG, ERS (equivalent reflector size) for DGS/AVG, AWS D1.1/D1.5 rating (D), Reject Value
	DAC/TVG	Standard
	DAC points	Up to 50 points, 110 dB dynamic range
	Special DAC modes	Custom DAC (up to 6 curves)
	Curved surface correction	Standard OD or Bar correction for Angle Beam measurements

PreviousNext